Mdc Module - Toshiba PORTEGE A200 series Maintenance Manual

4.13 MDC module

4.13 MDC module
Removing the MDC module
To remove the MDC module, perform the following procedure. (See Figure 4-19.)
1. Remove the following screws fixing the MDC module.
?
2. Remove the MDC mo dule from the connector PJ3010 on the system board.
3. Disconnect the MDC cable from the MDC module.
M2? 4Z S-THIN HEAD
Installing a MDC module
To install a MDC module, perform the following procedure. (See Figure 4-19.)
1. Connect the MDC cable to the MDC module.
2. Install the MDC module to the connector PJ3010 on the system board.
3. Fix the MDC module with the following screws .
?
PORTEGE A200 Maintenance Manual (960-499)
M2? 4Z S-THIN HEAD screw
Figure 4-19 Removing the MDC module
M2? 4Z S-THIN HEAD screw
4 Replacement Procedures
? 2
MDC module
PJ3010
MDC cable
? 2
4-29