Floppy Disk Test - Toshiba PORTEGE A200 series Maintenance Manual

Personal computer
Hide thumbs Also See for PORTEGE A200 series:
Table of Contents

Advertisement

3 Tests and Diagnostics

3.10 Floppy Disk Test

Caution:
Before running the floppy disk test, prepare a formatted work disk. Remove
the Diagnostics Disk and insert the work disk into the FDD because the
contents of the floppy disk will be erased.
To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press Enter
and follow the directions displayed on the screen.
1. The following message will appear. Select the media mode and start track to be tested and
press Enter.
Test start track
2. The Floppy Disk test contains five subtests that test the FDD.
The floppy disk test menu will appear after you select FDD test parameters.
FLOPPY DISK
SUB-TEST
PASS COUNT
WRITE DATA
ADDRESS
SUB-TEST MENU :
01 - Sequential read
02 - Sequential read/write
03 - Random address/data
04 - Write specified address
05 - Read specified address
99 - Exit to DIAGNOSTIC TEST MENU
3-22
(Enter:0/dd:00-79) ?
XXXXXXX
: XX
: XXXXX
ERROR COUNT
: XX
READ DATA
: XXXXXX
STATUS
3.10 Floppy Disk Test
XXX DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] :
[Ctrl]+[C]
: XXXXX
: XX
: XXX
PORTEGE A200 Maintenance Manual (960-499)
test end
:
key stop

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents