Toshiba PORTEGE A200 series Maintenance Manual page 151

3 Tests and Diagnostics
4. DUMP program
(a) When DUMP is selected, the following message appears.
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
(b) Select a drive type. If
selected, the following message will appear.
Select drive number
(c) Select a drive number and the following message will be displayed.
Format type select (1:2DD, 3:2HD) ?
(d) If
3:2HD
2HD media mode (1:1.20MB, 2:1.44MB, 3:1.23MB)?
(e) The following message will appear.
Insert source disk into drive A:
Press any key when ready.
(f) Insert a source disk and press any key and the following message will appear.
—— Max. address ——
[Track ] = XXXX
[Head
[Sector] = XX
Track number ????
(g) Set the track number, head number and sector number you want to dump. The
system will access the disk and dump a list. Then the message shown in (k) will
appear.
(h) The following message will appear when selecting
Select drive number
(i) Select a drive number and the following message will be displayed.
---Max. address ---
[LBA ] = XXXXXXXXX
LBA number ????????
(j) Set the LBA number you want to dump. The system will access the disk and dump
a list.
3-54
is selected, the display will go to step (h). If
2:HDD
is selected, the following message will appear. Select a media mode.
] = XX
3.24 Floppy Disk Drive Utilities
(1:A, 2:B) ?
in (a).
2:HDD
(1:C, 2:D) ?
PORTEGE A200 Maintenance Manual (960-499)
is
1:FDD