Toshiba PORTEGE A200 series Maintenance Manual page 260

4.23 LCD cable/LED cable
Installing a LED cable
To install a LED cable, perform the following procedure. (See Figure 4-45.)
1. Pass the LED cable through the hinge hole to the system board side.
2. Install the hinge cap and fix it with the following screw. Do not pinch the LED cable
between the hinge cap and the cover assembly. Be careful not to miss the direction of
the hinge cap.
?
3. Align the white mark on the LED cable to the hinge cap and stick the insulator (back
of the cover assembly) on the LED cable.
PORTEGE A200 Maintenance Manual (960-499)
M2.5? 6B S-THIN HEAD screw
4 Replacement Procedures
? 1
4-55