Product Information; Intended Use - Viessmann Vitodens 200-W Installation Instructions Manual

Intended use

The appliance is only intended to be
installed and operated in sealed unven-
ted heating systems that comply with
EN 12828, with due attention paid to the
associated installation, service and
operating instructions. It is only designed
for the heating of water that is of potable
water quality.
Intended usage presupposes that a fixed
installation in conjunction with permissi-
ble, system-specific components has
been carried out.
Commercial or industrial usage for a pur-
pose other than heating the building or
DHW does not comply with regulations.

Product information

Vitodens 200-W, type B2HA
Preset for operation with natural gas E
and natural gas LL.
For conversion to LPG P (without con-
version kit), see the service instruc-
tions.
In principle the Vitodens 200-W may
only be delivered to countries listed on
the type plate. For deliveries to alterna-
tive countries, approved contractors
must arrange individual approval on their
own initiative and in accordance with the
law of the country in question.
Multi boiler system
For the installation of a multi boiler sys-
tem observe the installation instructions
for the multi boiler system accessories.
Any usage beyond this must be
approved by the manufacturer for the
individual case.
Incorrect usage or operation of the appli-
ance (e.g. the appliance being opened
by the system user) is prohibited and
results in an exclusion of liability. Incor-
rect usage also occurs if the components
in the heating system are modified from
their intended function (e.g. if the flue
gas and ventilation air paths are
sealed).
Product information
7