Table of Contents
Advertisement
General Information
General Information
Applicability
CAUTION
The boiler serial number must be
provided when ordering replacement
parts. Some replacement parts are
not reverse compatible with previous
versions of the Vitodens 200-W
WB2B boiler.
IMPORTANT
When ordering replacement parts,
provide either the 16-digit boiler serial
number (on the bar code label) or the
12-digit ASME/NB serial number,
located as shown underneath boiler
front enclosure panel. Refer to page 15
for instructions on how to remove front
enclosure panel.
Model No. WB2B 45
Serial No. 7374866 jjjjjjjjj
Model No. WB2B 60
Serial No. 7374867 jjjjjjjjj
Product Information
8
12-digit ASME/NB serial number
(located on metallic plate riveted
to the heat exchanger)
Stainless steel Inox-Radial
heat exchanger
16-digit serial boiler number
on white bar code label
labelled "Boiler Serial Number" is
also located on the bottom of
the boiler.
Fig. 1 Locating boiler serial numbers for ordering replacement parts
Natural/Liquid propane gas-fired wall-mounted condensing heating boiler for
weather-responsive operation in closed loop, forced circulation hot water heating
systems for space heating and domestic hot water (DHW) production.
The Vitodens 200-W, WB2B series boiler comes factory set for operation with
natural gas. For a fuel conversion to liquid propane gas no conversion kit is
required
Boiler model must be selected based on an accurate heat loss calculation of the
building. Ensure boiler model is compatible with connected radiation.
Vitodens 200-W, WB2B series boilers are factory-tested and calibrated. Further
gas valve adjustments are not typically required during field start-up.
See the Vitodens 200-W, WB2B
Start-up/Service Instructions.
.
Advertisement
Table of Contents
