Toshiba e-studio 2500c Operator's Manual page 95

Recalling dimensions registered in the memory
Press the desired memory number button from [MEMORY 1] to [MEMORY 4] to recall
the dimension data registered previously, and then press the [ENTER] button.
Set other copy modes as required.
Paper size that can be set is as follows:
Length: 100 mm to 297 mm
Width: 148 mm to 432 mm
To register the dimension data in the memory, see
dard size in the memory".
5
Press the [START] button on the control panel.
P.94 "Registering non-stan-
Bypass Copying 93