Toshiba e-studio 2500c Operator's Manual page 300

8 JOB STATUS
Error code
A222
A290
A291
A292
A2A0
A2A1
A2A2
RFC related
Error code
2500
2501
2503
2504
2550
2551
2552
2553
298 Error Code
Problem
Print Job power inter- Power failure occurred. Retry the print.
ruption
Limit over error Number of prints has exceeded the one specified with the
(Black and White) department code and user code at the same time. Clear the limit
counter.
Limit over error Number of prints has exceeded the one specified with the user
(Black and White) code. Clear the limit counter.
Limit over error Number of prints has exceeded the one specified with the
(Black and White) department code. Clear the limit counter.
Limit over error Number of prints has exceeded the one specified with the
(Colour) department code and user code at the same time. Clear the limit
counter.
Limit over error Number of prints has exceeded the one specified with the user
(Colour) code. Clear the limit counter.
Limit over error Number of prints has exceeded the one specified with the
(Colour) department code. Clear the limit counter.
Problem
Syntax error, com- Check if the Terminal mail address and Destination mail address
mand unrecognized: are correct.
HOST NAME error Check if the mail server is operating properly.
(RFC: 500), Destina- Turn the power OFF and then back ON, and perform the job in
tion mail address error error again.
(RFC: 500), Terminal
mail address error
(RFC: 500)
Syntax error in param- Check if the Terminal mail address and Destination mail address
eters or arguments: are correct.
HOST NAME error Check if the mail server is operating properly.
(RFC: 501), Destina- Turn the power OFF and then back ON, and perform the job in
tion mail address error error again.
(RFC: 501), Terminal
mail address error
(RFC: 501)
Destination mail Check if the mail server is operating properly.
address error Turn the power OFF and then back ON, and perform the job in
(RFC: 503) error again.
If the error still occurs, contact your service representative.
HOST NAME error Check if the mail server is operating properly.
(RFC: 504) Turn the power OFF and then back ON, and perform the job in
error again.
If the error still occurs, contact your service representative.
Destination mail Check if the Destination mail address is correct. Check the sta-
address error tus of mailbox access restriction, etc. on the mail server.
(RFC: 550)
Destination mail Check the Destination mail address. Check if the mail server is
address error operating properly.
(RFC: 551)
Terminal/Destination Check if the Destination mail address is correct. Check the
mail address error restriction of the capacity in the mailbox of the mail server.
(RFC: 552)
Terminal/Destination Check if there is an illegal character in the mailbox in the mail
mail address error server.
(RFC: 553)
What to do
What to do