4 IMAGE ADJUSTMENT
RGB Adjustment
This function allows you to adjust an overall colour balance of the copied image by changing the
strength of red (R), green (G) and blue (B) at the time of scanning.
This function is available only in the full colour mode and the auto colour mode.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press the [IMAGE] button to enter the image menu, and then press
the [RGB ADJUSTMENT] button.
4
Press the
balance. Then press the [ENTER] button.
" " at the centre of each colour bar denotes its default setting.
Pressing the
weakens it.
Select other copy modes as required.
5
Press the [START] button.
Cancelling RGB adjustment
Move the indicator of the colour whose adjustment you want to cancel its adjustment to
your pressing the
If you want to cancel the adjustment of all colours, press the [DEFAULT] button, and then press
the [ENTER] button.
142
RGB Adjustment
or
button of the colour to obtain the desired colour
button strengthens the adjusted colour, and pressing the
or
button, and then press the [ENTER] button.
button
by