Toshiba e-studio 2500c Operator's Manual page 37

8. Saddle Stitch Finisher (MJ-1030)
This finisher enables saddle stitching, in addition to sort/group finishing and stapling. The
Hole Punch Unit (optional, MJ-6004) can be installed to this finisher. The Bridge Unit
(optional, KN-3500) is required for the installation of this finisher.
9. Hole Punch Unit (MJ-6101)
This unit enables you to punch holes on printouts. It can be used by installing it on the Fin-
isher (MJ-1101).
10. Hole Punch Unit (MJ-6004)
This unit enables you to punch holes on printouts. It can be used by installing it on the Fin-
isher (MJ-1030).
Other options available are as follows. Contact your service technician or Toshiba product dis-
tributors for details.
Work Table (KK-3511)
This is a small table for placing originals while the equipment is operated.
Installed on the right-hand side of the equipment
Cannot be installed with e-BRIDGE ID Gate at the same time
FAX Unit (GD-1210)
This is a unit for using the equipment as a Fax.
Installed inside of the equipment
2nd Line for Fax Unit (GD-1160)
This unit enables to add a line to the Fax to make it 2nd line.
Installed inside of the equipment
The Fax Unit (GD-1210) is necessary.
Data Overwrite Kit (GP-1060)
This is a kit to delete the temporarily stored data when copy, print, scan, Fax, internet Fax and
network Fax are performed.
Installed inside of the equipment
512 MB Expansion Memory (GC-1250)
This memory enables the B4, A3 and FOLIO (LD, LG, 13" LG, COMP) size originals to be
scanned with the slim PDF format.
Installed inside of the equipment
256 MB Expansion Memory (GC-1260)
This memory enables scanning in the full colour, auto colour and image smoothing mode with
600 dpi.
Installed inside of the equipment
Wireless LAN Module (GN-1041)
This module enables the equipment to be used in a wireless LAN environment.
Installed inside of the equipment
The Antenna (GN-3010) is necessary.
The equipment cannot be connected to the wireless and wired LAN at the same time.
Bluetooth Module (GN-2010)
This module enables the Bluetooth printing.
Installed inside of the equipment
The Antenna (GN-3010) is necessary.
Description of Each Component 35