Toshiba e-studio 2500c Operator's Manual page 90

2 HOW TO MAKE COPIES
When you want to make 1-sided copies on THICK2, THICK3, SPECIAL1 or
SPECIAL2 paper, select (FRONT) for the paper. Select (BACK) for making 2-sided
copies on that paper.
e.g.: When making a 2-sided copy on a THICK3 paper
1. Place a sheet of THICK3 paper on the bypass tray.
2. Select THICK3 (FRONT) and make a 1-sided copy.
3. Place the paper copied at step 2 on the bypass tray again with its blank side
4. Select THICK3 (BACK) and make a copy.
The paper type which has been set can be confirmed with the touch panel.
PLAIN
THICK1
THICK2 (FRONT)
THICK2 (BACK)
THICK3 (FRONT)
THICK3 (BACK)
6
Press the [START] button on the control panel.
When you copy on OHP films, remove the copied OHP films, which have exited on to the
receiving tray one by one. When the films pile up, they may become curled and may not
be projected properly.
88 Bypass Copying
face down.
If you place the paper on the bypass tray with its top to bottom direction
unchanged, the original is copied in 'open to left', and if you place it with its top
to bottom direction changed, the original is copied in 'open to top'.
- When you want to make 2-sided copies on PLAIN, RECYCLED PAPER or
THICK1, use the Automatic Duplexing Unit of the equipment.
- OHP films cannot be copied 2-sided.
-- TRANSPARENCY
RECYCLED PAPER
SPECIAL1 (FRONT)
SPECIAL1 (BACK)
SPECIAL2 (FRONT)
SPECIAL2 (BACK)