Toshiba e-studio 2500c Operator's Manual page 177

6
Enter the values read in step 5 for the specified area, and then
press the [SET] button. Set 4 values in order.
After the setting of 4 values is finished, the next edit area menu is displayed. Repeat
steps 5 and 6 when you specify other areas. Up to 4 areas can be specified on an
original.
To correct the value which has been set, press the [RESET] button. Pressing it once
makes the highlighted field move one position upward. Highlight the field in which you
want to rectify the value, and then key in the correct one.
7
Press the [ENTER] button after specifying the area.
8
Place the original(s) with its
face down.
Set the original face down with its
bottom toward you and fit its top left
corner against the top left corner of
the original glass.
Select other copy modes as
required.
9
Press the [START] button.
EDITING 175