Table of Contents
Advertisement
65MIV/65MIV2/65MIV-X/65MIV2-X
2-1 CPU INSTALLATION
WARNING !!!
Never run you processor without the heat sink properly and firmly attached.
PERMANENT DAMAGE WILL RESULT!
1. Pull the lever sidways away from the socket, and then raise the lever up
to a 90-degree angle.
2. Take note of the red circle as below picture. When insert the CPU into
socket, you can find out there is a definite pin orientation for CPU and
socket.
16
CHAPTER 2
HARDWARE SETUP
Advertisement
Table of Contents
