14.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open the following
screen.
Figure 98 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 74 Interface Grouping Criteria
LABEL
Source MAC
Address
DHCP Option
60
Enable
wildcard on
DHCP
option 60
option
DHCP Option
61
IAID
DUID type
DHCP Option
125
Chapter 14 Interface Group
DESCRIPTION
Enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,
such as the type of the hardware or firmware.
Select this option to be able to use wildcards in the Vendor Class Identifier configured for
DHCP option 60.
Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN
connection index number.
Select DUID-LLT (DUID Based on Link-layer Address Plus Time) to enter the hardware
type, a time value and the MAC address of the device.
Select DUID-EN (DUID Assigned by Vendor Based upon Enterprise Number) to enter the
vendor's registered enterprise number.
Select DUID-LL (DUID Based on Link-layer Address) to enter the device's hardware type
and hardware address (MAC address) in the following fields.
Select Other to enter any string that identifies the device in the DUID field.
Select this and enter vendor specific information of the matched traffic.
VMG5313-B10A/-B30A Series User's Guide
208