ZyXEL Communications VMG5313-B30A User Manual page 116

Table 21 Network Setting > Wireless > Guest / More AP > Edit (continued)
LABEL DESCRIPTION
Wireless The SSID (Service Set IDentity) identifies the service set with which a wireless device is
Network Name associated. Wireless devices associating to the access point (AP) must have the same SSID.
(SSID)
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Max clients Specify the maximum number of clients that can connect to this network at the same time.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Enhanced Select this check box to allow the VMG to convert wireless multicast traffic into wireless
Multicast unicast traffic.
Forwarding
Guest WLAN Select this to create Guest WLANs for home and external clients. Select the WLAN type in
the Access Scenario field.
Access If you select Home Guest, clients can connect to each other directly.
Scenario
If you select External Guest, clients are blocked from connecting to each other directly.
Maximum Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in
Upstream kilobits per second (Kbps).
Bandwidth
Maximum Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN in
Downstream kilobits per second (Kbps).
Bandwidth
BSSID This shows the MAC address of the wireless interface on the VMG when wireless LAN is
enabled.
E-mail notification when the wireless guest visit
Enable Email Select this to have the VMG e-mail you a notification when a wireless client is connected to
Notification the wireless network.
Mail Server Select a mail server for the e-mail address specified below.
If you do not select a mail server, e-mail notifications cannot be sent via e-mail. You must
have configured a mail server already in the Maintenance > Email Notification screen.
Email Title Type a title that you want to be in the subject line of the e-mail notifications that the VMG
sends.
Send Notifications are sent to the e-mail address specified in this field. If this field is left blank,
Notification to notifications cannot be sent via e-mail.
Email
Security Level
Security Mode Select Basic (WEP, 802.1X) or More Secure (WPA(2)-PSK) to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the VMG. After you select to use a security, additional
options appears in this screen.
Or you can select No Security to allow any client to associate this network without any data
encryption or authentication.
See Section 7.2.1 on page 110
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Chapter 7 Wireless
for more details about this field.
VMG5313-B10A/-B30A Series User's Guide
116