Table 3 Navigation Panel Summary (continued)
LINK
TAB
Email
Email
Notification
Notification
Log Setting
Log Setting
Firmware
Firmware
Upgrade
Upgrade
Configuration
Configuration
Reboot
Reboot
Diagnostic
Ping&Traceroute
&Nslookup
802.1ag
OAM Ping
Chapter 2 The Web Configurator
FUNCTION
Use this screen to configure up to two mail servers and sender
addresses on the VMG.
Use this screen to change your VMG's log settings.
Use this screen to upload firmware to your VMG.
Use this screen to backup and restore your VMG's configuration
(settings) or reset the factory default settings.
Use this screen to reboot the VMG without turning the power off.
Use this screen to identify problems with the DSL connection. You can
use Ping, TraceRoute, or Nslookup to help you identify problems.
Use this screen to configure CFM (Connectivity Fault Management)
MD (maintenance domain) and MA (maintenance association),
perform connectivity tests and view test reports.
Use this screen to view information to help you identify problems with
the DSL connection.
VMG5313-B10A/-B30A Series User's Guide
31