The Sip Service Provider Screen - ZyXEL Communications VMG5313-B30A User Manual

Table 109 VoIP > SIP > SIP Account > Add new accoun/Edit (continued)
LABEL
Warm Line
Hot Line
Hot Line / Warm
Line number
Warm Line Timer
Enable Missed
Call Email
Notification
Mail Server
Send
Notification to
Email
Missed Call
Email Title
Early Media
IVR Play
Index
Music On Hold
IVR Play
Index
Apply
Cancel

23.4 The SIP Service Provider Screen

Use this screen to view the SIP service provider information on the VMG. Click VoIP > SIP > SIP
Service Provider to open the following screen.
Chapter 23 Voice
DESCRIPTION
Select this to have the VMG dial the specified warm line number after you pick
up the telephone and do not press any keys on the keypad for a period of time.
Select this to have the VMG dial the specified hot line number immediately when
you pick up the telephone.
Enter the number of the hot line or warm line that you want the VMG to dial.
Enter a number of seconds that the VMG waits before dialing the warm line
number if you pick up the telephone and do not press any keys on the keypad.
Select this option to have the VMG e-mail you a notification when there is a
missed call.
Select a mail server for the e-mail address specified below. If you select None
here, e-mail notifications will not be sent via e-mail.
You must have configured a mail server already in the Email Notification
screen.
Notifications are sent to the e-mail address specified in this field. If this field is
left blank, notifications will not be sent via e-mail.
Type a title that you want to be in the subject line of the e-mail notifications that
the VMG sends.
Select this option if you want people to hear a customized recording when they
call you.
Select the tone you want people to hear when they call you.
This field is configurable only when you select Early Media. See
on page 282 for information on how to record these tones.
Select this option to play a customized recording when you put people on hold.
Select the tone to play when you put someone on hold.
This field is configurable only when you select Music On Hold. See
23.10 on page 282 for information on how to record these tones.
Click this to save your changes and to apply them to the VMG.
Click this to set every field in this screen to its last-saved value.
VMG5313-B10A/-B30A Series User's Guide
271
Section 23.10
Section