The Tftp Server Name Screen - ZyXEL Communications VMG5313-B30A User Manual

Click Network Setting > Home Networking > Wake on Lan to open this screen.
Figure 55 Network Setting > Home Networking > Wake on Lan
The following table describes the labels in this screen.
Table 36 Network Setting > Home Networking > Wake on Lan
LABEL
Wake by
Address
IP Address
MAC Address
Wake up

8.8 The TFTP Server Name Screen

Use the TFTP Server screen to identify a TFTP server for configuration file download using DHCP
option 66. RFC 2132 defines the option 66 open standard. DHCP option 66 supports the IP address
or the hostname of a single TFTP server.
Click Network Setting > Home Networking > TFTP Server Name to open this screen.
Figure 56 Network Setting > Home Networking > TFTP Server Name
Chapter 8 Home Networking
DESCRIPTION
Select Manual and enter the IP address or MAC address of the device to turn it on remotely.
The drop-down list also lists the IP addresses that can be found in the VMG's ARP table.
Select an IP address and it will then automatically update the IP address and MAC address
in the following fields.
Enter the IPv4 IP address of the device to turn it on.
Enter the MAC address of the device to turn it on. A MAC address consists of six
hexadecimal character pairs.
Click this to send a wake up packet to wake up the specified device.
VMG5313-B10A/-B30A Series User's Guide
151