ZyXEL Communications VMG5313-B30A User Manual page 28

Table 3 Navigation Panel Summary (continued)
LINK TAB
Routing Static Route
DNS Route
Policy
Forwarding
RIP
QoS General
Queue Setup
Class Setup
Policer Setup
NAT Port Forwarding
Applications
Port Triggering
DMZ
ALG
Address Mapping Use this screen to change your Device's address mapping settings.
Sessions
DDNS DNS Entry
Dynamic DNS
Vlan Group Vlan Group
Interface Interface
Grouping
Grouping
USB Service File Sharing
Media Server
Print Server
Power Power
Management
Management
Auto Switch Off
Security Settings
Chapter 2 The Web Configurator
FUNCTION
Use this screen to view and set up static routes on the VMG.
Use this screen to forward DNS queries for certain domain names
through a specific WAN interface to its DNS server(s).
Use this screen to configure policy routing on the VMG.
Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.
Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Use this screen to configure QoS queues.
Use this screen to define a classifier.
Use these screens to configure QoS policers.
Use this screen to make your local servers visible to the outside
world.
Use this screen to configure servers behind the VMG.
Use this screen to change your VMG's port triggering settings.
Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
Use this screen to enable or disable SIP ALG.
Use this screen to configure the maximum number of NAT sessions
each client host is allowed to have through the VMG.
Use this screen to view and configure DNS routes.
Use this screen to allow a static hostname alias for a dynamic IP
address.
Use this screen to group and tag VLAN IDs to outgoing traffic from
the specified interface.
Use this screen to map a port to a PVC or bridge group.
Use this screen to enable file sharing via the VMG.
Use this screen to use the VMG as a media server.
Use this screen to enable the print server on the VMG and get the
model name of the associated printer.
This screen is only available for administrators. Use this screen to
manually turn on/off specific interface(s) and/or all LEDs
immediately.
This screen is only available for administrators. Use this screen to
configure schedules to have the VMG automatically turn on/off
specific interface(s) and/or all LEDs.
VMG5313-B10A/-B30A Series User's Guide
28