17.1 Overview
This chapter explains how to configure the LTE2566-M634 remote management. Remote Management
allows you to manage your LTE2566-M634 from a remote location.
17.2 What You Can Do
• Use the Local MGMT screen to configure settings for HTTP or HTTPS access to the LTE2566-M634
(Section 17.4 on page
• Use the Remote MGMT screen to configure through which interface(s) users can use which service(s)
to manage the LTE2566-M634
17.3 What You Need To Know
Remote management over LAN or WAN will not work when:
• The IP address
the LTE2566-M634 will disconnect the session immediately.
• There is a firewall rule that blocks it.
17.3.1 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The
LTE2566-M634 automatically logs you out if the management session remains idle for longer than this
timeout period. The management session does not time out when a statistics screen is polling. You can
change the timeout period in the Maintenance > General screen.
17.4 Local MGMT
To change your LTE2566-M634's remote management settings, click Configuration > Management >
MGMT Interface to open the Local MGMT screen.
Note: You must enable the remote management service in the Configuration > Management
> MGMT Interface > Local MGMT screen for the settings in the WWW screen to take
effect.
MGMT Interface
103).
(Section 17.5 on page
(Section 17.4 on page
103) does not match the client IP address. If it does not match,
LTE2566-M634 User's Guide
C
H A P T E R
104).
103
17