Setup Wizard; Enter Administrator Password - KGuard Security Aurora Series User Manual

Setup Wizard

The Setup Wizard will appear the first time you start the DVR. It will guide you to configure initial DVR settings
including time setup, network setup, and other basic settings.
Follow the on-screen instructions to complete the initial setup.
Note:
To skip and disable Startup Wizard, check the "Don't display this window again" box and click Cancel.

Enter Administrator Password

Aurora Series: Getting Started
User name: By default, the
administrator user name is set to
"Admin".
Password: Old password (Default) is
123456. We suggest you change the
password to protect your privacy.
Note:
If the password is left blank then
the connection via portable device
(smart phone/pad) to the DVR will
not be established.
DVR User's Manual
21