Color Settings - KGuard Security Aurora Series User Manual

Time/Name: Choose to hide or display the recording data (time, date, or channel) during recording. See
Settings" on page 36.
Copy CH/To CH: Select to copy the current settings to all channels or one specific channel. Click the arrow to select
an option and then click Copy.
After all settings are complete, click Apply.
• Privacy Zone Settings

• Color Settings

Note:
All the changes to the image color settings affect your recordings!
Click Apply to save the settings.
In Color menu you can configure the brightness, contrast, hue and saturation
settings per channel.
Brightness (BRI): Defines how bright the image appears on the display.
Contrast (CON): Increases the difference between the darkest black and the
whitest white in the image. Modify the contrast if the sections of the image "grey
out".
Note:
Setting the contrast parameter too high will degrade the image quality.
Hue: Changes the color mix of the image.
Saturation (SAT): Alters how much color is displayed in the image. The highest the
saturation, the brighter and vivid colors will appear to be. Setting this parameter
too high can degrade the image quality.
Aurora Series: Configuring DVR Settings
Defining a privacy zone in the channel
allows to block a portion of the
channel with a black box.
To add a privacy zone, in Mask, click
Settings and select the channel that
you want to set the privacy.
Drag the mouse to frame an area on
the screen that you want to mask.
The black box indicates the area for
masking. You can set up to 4 mask
areas.
Click Apply to save the settings.
"Overlay
DVR User's Manual
35