T
11.1 Wall mounting
Proceed as follows to mount your Pacific AFT system to a wall:
09 Use a twist drill (8mm or 5/16 inch) to make the two holes in the wall that are
required
2) Plug the nylon S8 dowels that are supplied in the assembly kit in the holes. Screw the
5.2 x 50 mm screw hooks that are also supplied in the assembly kit in the dowels.
3) Lift the Pacific AFT system (2 people are required for this) and hang the
back side of it on the scew hooks.
as shown in the diagram above.
Thermo Fisher Barnstead Pacific AFT
Pure water system
21