Rinse Interval Time; Real Time Clock; Sending Interval - Thermo Scientific 50135178 AFT 3 Operating Instructions Manual

T

13.2.5 Rinse interval time

A fifth press on the menu-key:
A fifth press on the menu-key:
The rinse interval time is set in this menu. A rinse is carried out for this length of time when
the operating state is changed, between stand-by and operation and every 12 hours.
Basic setting:
Setting range: 1 – 30 sec.
The display shows:

13.2.6 Real time clock:

A sixth press on the menu-key:
The real time clock is set in this menu.
Basic setting:
Setting range:
The display shows:

13.2 7 Sending interval:

A seventh press on the menu-key:
The sending interval for transmission of measured values and fault messages to the RS 232
interface is set in this menu..
Basic setting:
Setting range:
The display shows:
32
2 sec.
OEM-Menu
Rinse Interval
2 sec.
The actual date
1 – 12 month,1 – 31 day, 0 – 24 h, 0 – 60 min.
OEM-Menu
Day 30 Month 12
Year 2004
Hours 12 min.30
8 hours
0.5 – 12 hours
OEM-Menu
Send interval
Thermo Fisher Barnstead Pacific AFT
8 h
Pure water system