**【Enter Setup】
Set Length Range for MicroPDF417
The scanner can be configured to only decode MicroPDF417 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Both lengths can range from 1 to 255 bytes. If minimum length is same as maximum length, only MicroPDF417
barcodes with that length are to be decoded. The default minimum and maximum lengths are 1 byte and 255 bytes
respectively.
【Set the Minimum Length】
Example: Set the scanner to decode MicroPDF417 barcodes containing between 8 and 12 bytes.
1.
Scan the Enter Setup barcode.
2.
Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8". (See the "Digit Barcodes" section in Chapter 7)
3.
Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Chapter 7)
4.
5.
Scan the Set the Maximum Length barcode.
Scan the numeric barcode "1".
6.
Scan the numeric barcode "2".
7.
8.
Scan the Save barcode.
9.
Scan the Exit Setup barcode.
【Exit Setup】
【Set the Maximum Length】
158