Mx3X-Vxc Options; Communication; Enable Tcp/Ip Version 6; Allow Remote Desktop Autologon - Honeywell vx6 Reference Manual

MX3X-VXC Options

Start > Settings > Control Panel > MX3X-VXC Options
Set options such as IP V6, time sync, touch screen enable and CapsLock. Also set Status Popup taskbar icon display options
for the Admin and User.
It may be necessary to warmboot the VX6 after making desired changes. A pop up window indicates if a warmboot is required.
Note: Contact Technical Assistance

Communication

Options on this tab configure communication options for the VX6.

Enable TCP/IP Version 6

By default, IPv6 is disabled on the VX6. Click this checkbox to enable IPv6.

Allow Remote Desktop Autologon

By default, Remote Desktop Autologon is disabled. Click this checkbox to enable Remote Desktop Autologon.
Note: The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save the .RDP file is
the \System folder. If the .RDP file is saved in the default root folder location, the .RDP file will not persist across a
warmboot.

Autolaunch TimeSync

By default, TimeSync does not automatically run on the VX6. To enable TimeSync to run automatically on the VX6, click this
checkbox.
Synchronize with a Local Time Server
By default, GrabTime synchronizes via an Internet connection. To synchronize with a local time server:
3-102
for upgrade details If there is no icon corresponding to this item in the Control Panel.