802.11B/G And A/B/G Wireless Client; Central Processing Unit; Input/Output Components; System Memory - Honeywell vx6 Reference Manual

802.11b/g and a/b/g Wireless Client

The VX6 has an 802.11x network card that supports diversity with two internal antennas. The CPU board does not allow hot
swapping the network card. Power management for the network card is configured with the
WEP, WPA and LEAP are supported.

Central Processing Unit

The CPU is a 400MHz Intel PXA255. The operating system is Microsoft CE 4.2 or 5.0. The OS image is stored on an internal
SD flash card and is loaded into DRAM for execution.

Input/Output Components

The VX6 supports the following I/O components of the core logic:
Two 9-pin RS-232 serial ports configured as COM1 and COM3 (labeled "COM2/3"). There is no COM2 port on the VX6.
l
Two PCMCIA slots (supporting Type I or II PCMCIA cards).
l
One slot for SD memory card.
l
CompactFlash (CF) or Secure Digital (SD) drive.
l
Integrated QWERTY keyboard.
l
Ports available via dongle cable:
l
USB Host port
l
USB Client port
l
Optional Ethernet port
l
One audio jack providing monaural audio output.
l

System Memory

Main system memory is 128MB DRAM.

Video Subsystem

The VX6 video subsystem consists of a color TFT display. The video subsystem complies with the VESA VL bus standard.
The resolution of this display is 800 by 320 pixels. This resolution complies with the SVGA graphics industry standard.
The display supports screen blanking to eliminate driver distraction when the vehicle is in motion.
2-2
Summit Client Utility.