Honeywell vx6 Reference Manual page 256

On the Main Tab, click the
l
If using a single profile, edit the default profile with the parameters for your network. Select the Default profile from the
l
pull down menu.
Make any desired parameter changes as described in the applicable following section determined by network security
l
type and click the Commit button to save the changes.
Remember to click the Commit button after making changes to ensure the changes are saved. Many versions of the SCU
display a reminder if the Commit button is not clicked before an attempt is made to close or browse away from the tab in focus
if there are unsaved changes.
If changes are made to the stored credentials, click Commit to save those changes first before making any additional changes.
5-22
Admin Login button and enter the password.