Misc; Capslock; Touch Screen Disable; Touch Screen Heater Disable - Honeywell vx6 Reference Manual

Misc

Options on this tab configure device specific options. Note that options not available on the VX6 are dimmed or grayed out.

CapsLock

By default, CapsLock is disabled after a warmboot. To enable CapsLock after a warmboot, click this checkbox.

Touch Screen Disable

By default, the VX6 touch screen is enabled. To disable the touch screen after a warmboot, click this checkbox.

Touch Screen Heater Disable

The touch screen heater is optional on the VX6.
By default, the touch screen heater is enabled. To disable the touch screen heater, click this checkbox. If the VX6 does not
have a touch screen heater, this checkbox is dimmed.

Large SIP

The Software Input Panel (SIP, also called virtual keyboard) can be displayed in a standard size or a large size. By default, the
smaller SIP is displayed. To enable the larger SIP, check this checkbox.

Enable RFTerm Auto Launch

This option is enabled by default. This option, when disabled (unchecked) stops RFTerm from launching at bootup. When
RFTerm is not installed or has not been added to the registry Launch sequence, this checkbox is ignored at bootup.

Enable Auto Launch IP Wait

When enabled, this feature works as follows:
1. After the radio .CAB file is unpacked, the Launch program waits for the radio driver to load and for the radio to connect
and obtain an IP address.
3-104