Mobile Device Wireless And Network Settings - Honeywell vx6 Reference Manual

Mobile Device Wireless and Network Settings

Once the connection to the Mobile Device Server is established, the VX6 Enabler attempts to apply all network and wireless
settings contained in the active profile.
The success of the application of settings is dependent upon the local configuration of control parameters for the Enabler.
These local parameters cannot be overridden from the Avalanche MC Console.
The default Enabler adapter control settings are:
Manage network settings – enabled
l
Use Avalanche network profile – enabled
l
Manage wireless settings – disabled
l
To configure the Avalanche Enabler management of the network and wireless settings:
1. Open the Enabler Settings Panels by tapping the Enabler icon on the desktop.
2. Select File > Settings.
3. Select the Adapters tab.
4. Choose settings for the Use Manual Settings parameter.
5. Choose settings for Manage Network Settings, Manage Wireless Settings and Use Avalanche Network Profile.
6. Click the OK button to save the changes.
7. Reboot the device.
4-5