Honeywell vx6 Reference Manual page 82

4. Click the OK button to dismiss the About CERDisp dialog box. on the VX6 desktop by clicking the OK button in the
LXEConnect window on the PC desktop. The dialog box automatically times out and disappears after approximately 30
seconds.
5. The VX6 can now be configured from the LXEConnect window. Input from the PC's mouse and keyboard are
recognized as if they were attached to the VX6.
6. When the remote session is completed, terminate the LXEConnect program by selecting File > Exit or clicking on the X
in the upper right hand corner to close the application, then disconnect the ActiveSync cable.
Note: After using LXEConnect, the VX6 cannot go into Suspend mode until after a warmboot. If using Power Management
on a VX6, always warmboot the VX6 when finished using LXEConnect.
3-30