Eap-Fast - Honeywell vx6 Reference Manual

EAP-FAST

To use EAP-FAST, make sure the following profile options are used.
Enter the SSID of the Access Point assigned to this profile
l
Set EAP Type to EAP-FAST
l
Set Encryption to WPA TKIP
l
Set Auth Type to Open
l
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other entries as
detailed in this section.
The SCU supports EAP-FAST with automatic or manual PAC provisioning. With automatic PAC provisioning, the user
credentials, whether entered on the saved credentials screen or the sign on screen, are sent to the RADIUS server. The
RADIUS server must have auto provisioning enabled to send the PAC provisioning credentials to the VX6.
For automatic PAC provisioning, once a username/password is authenticated, the PAC information is stored on the VX6. The
same username/password must be used to authenticate each time. See the note below for more details.
For manual PAC provisioning, the PAC filename and Password must be entered.
See Sign-On vs. Stored Credentials
The entries on the Credentials screen are determined by the type of credentials (stored or sign on) and the type of PAC
provisioning (automatic or manual).
Click on the Credentials button.
To use Stored Credentials, click on the Credentials button. No entries are necessary for Sign-On Credentials with automatic
PAC provisioning as the user will be prompted for the Username and Password when connecting to the network.
5-32
for information on entering credentials.