Vx6 Os Upgrade; Introduction; Preparation; Procedure - Honeywell vx6 Reference Manual

VX6 OS Upgrade

Introduction

Depending on the size of the operating system, the total time required for a successful upgrade may require several minutes.
The OS upgrade files are unique to your VX6 physical configuration and date of manufacture. OS upgrade files designed for one
device configuration should not be used on a different device configuration.

Preparation

Please Contact Technical Assistance
l
Use ActiveSync to back up VX6 user files and store them elsewhere before beginning an upgrade on the VX6.
l
Maintain an uninterrupted AC/DC power source to the VX6 throughout this process.
l
The SD / CF card with the OS and systems files must be present for the VX6 to boot. Removal or installation of SD or
l
CF cards should be performed on a clean, well-lit surface.
Always perform OS updates when the VX6 has a dependable external power source connected to the VX6.
l

Procedure

1. Verify a dependable power source is applied to the VX6 and will stay connected during the upgrade procedure.
2. Establish an ActiveSync connection between the VX6 and a desktop/laptop computer.
3. Download the OS files from the desktop/laptop to the VX6's System folder.
4. During the file copy process to the VX6 System folder, when asked "Overwrite ?", select Yes to All.
5. Review the files that were downloaded to the System folder.
6. Restart the VX6.
7. Disconnect from ActiveSync.
8. When the OS finishes loading, check the OS update version by selecting Start > Settings > Control Panel > About >
Software tab.
The touch screen may require calibration, however most Windows OS versions save the calibration data, eliminating the need
to calibrate.
Contact Technical Assistance
3-20
to get the OS upgrade files.
for re-imaging options if the VX6 won't boot up after the upgrade is finished.