Using The Disc Kit Program On Cp/M 2.2 - AMSTRAD cpc 6128 User Instruction

At the A> prompt, type:
disckit3
Select the Ve r ; f
y
option from the main DISC KIT menu (key
f1),
and then follow
the instructions on the screen.
If you are operating a 2-drive system, you will be given the option to verify a disc
either in Drive A or Drive
B.
When the disc that you wish to verify is inserted in the drive, type
Y
to commence
verifying.
When verifying is completed, the following message will be displayed:
Verify compLeted
Remove disc
Press any key to continue
If you are operating a 2-drive system; you will be requested to remove BOTH discs,
and you must do so before you can perform any further operations. You may then
repeat the verifying process by typing
Y,
or exit to the main DISC KIT menu by
pressing any other key.
Using the DISC KIT program on CP/M 2.2
If you wish to format, copy, or verify discs created on or for the CPC664 or
CPC464+ DDIl (which both use
CP/M
2.2), a DISC KIT program has been provided
on Side 4 of your system discs package for this purpose. The program is called
D I S C KIT 2, and operates in the same manner as D I S C KIT 3 ,just described.
To run D I S C KIT 2, insert Side 4 of your system discs package into the computer's
disc drive, and type:
Icpm
After you receive the
CP/M
2.2 'sign-on' message and the A> prompt, type:
disckit2
From then on, simply select the required menu options and follow the instructions
displayed, as previously described for D I S C KIT 3.
NOTE - During copying, the D I S C KIT 2 program utilises the screen memory for
data. You will therefore see random patterns appear on the screen while copying is
being performed. .
Chapter 1 Page 82 Foundation Course