Dr. Logo For Cp/M 2.2 - AMSTRAD cpc 6128 User Instruction

Dr. LOGO
Dr. LOGO is a thoughtful implementation of LOGO which has been specially
customised for the AMSTRAD personal computer to make it even easier to program.
Extensions have been included to make available the powerful sound facilities ofthe
6128, and program editing is made easy by the inclusion of the cursor keys.
Getting Started
To operate Dr. LOGO, insert a copy of Side 1 of your master discs package into the
computer's disc drive, and type in:
ICPM
At the
A>
prompt, remove the disc (Side 1) from the drive, and insert your working
copy of Side 3 (DR. LOGO & HELP).
To run Dr. LOGO, type in:
SUBMIT LOG03
.... and after a few seconds, you will see the opening 'Welcome' message, followed by
the question mark? prompt.
Dr. LOGO for CP/M 2.2
NOTE - The version of Dr. LOGO which you will find on Side 4 of your
master package has been provided in case you require a copy of Dr. LOGO
to operate with
CP/M
2.2 (used on AMSTRAD models CPC664 and
CPC464+ DDIl), It is therefore not generally recommended to use the Side
4 version of Dr. LOGO on the CPC6128. The version provided on Side 3 of
your master package is Digital Research's full specification Dr. LOGO.
If you DO however wish to use the CP/M 2.2 version of Dr. LOGO, insert a
copy of Side 4 ofthe master package and type:
ICPM
At the
A>
prompt, type in:
SUBMIT LOG02
.... and after a few seconds, you will see the opening 'Welcome' message,
followed by the question mark? prompt.
Chapter 6 Page 2
Introduction to Logo