AMSTRAD cpc 6128 User Instruction page 92

When the disc that you wish to copy from is in the drive, press the Y key, (Y is for Yes,
meaning 'go-ahead and copy the disc').
The format of the disc will be examined by the computer, and displayed at the top of
the screen for your information.
After a while, you will see the message:
Insert disc to WRITE
Press any key to continue
At this point, you should take the disc that you are copying out of the drive. Then
insert the disc for copying onto, and press any key.
Information about the format of the disc to be copied onto (even if it is a new
unformatted disc) will be indicated at the top of the screen.
If the disc that you wish to copy onto is not correctly formatted (or not formatted at
all), this will be taken care of during copying, and you will see a message such as:
Disc isn't formatted (or faulty)
Goi ng to format whi le copyi ng
Di sc wi II be system format
.... or some other similar message, depending upon the discs that you are copying
between.
When the computer is again ready for the disc to copy from, it will display the
. .
message:
Insert disc to READ
Press any key to continue
.... and you should re-insert the disc to copy from.
After repeating this process a few times, the contents of the first disc will be copied
onto the second disc, and the message:
Copy completed
Remove disc
Press any key to continue
.... will appear, whereupon you should follow the instructions on the screen, which
give you the option to either copy another disc (by typing
Y)
or 'exit'ing to the main
DISC KIT menu.
Foundation Course' Chapter 1 Page 79