Connecting The Computer To A Monitor - AMSTRAD cpc 6128 User Instruction

Connecting the computer to a monitor
(If
you are using the CPC6128 with the MP2 Modulator/Power supply, skip to the
next section.)
1. Make sure that the monitor is not plugged into the Mains supply socket.
2. Connect the lead from the front of the monitor, which is fitted with the larger
(6-pin DIN) plug, into the rear socket of the computer marked MONITOR.
3. Connect the lead from the front of the monitor, which is fitted with the smaller
(5V DC) plug, into the rear socket on the computer marked 5V DC.
4. Connect the lead from the back of the computer, which is fitted with a small
(12V DC) plug, into the socket at the front ofthe monitor.
FRONT OF MONITOR
REAR PANEL OF COMPUTER
JOOOOOUuooooouoo
Chapter 1 Page 2 Foundation Course