Copying On A 2-Drive System - AMSTRAD cpc 6128 User Instruction

Write protection
Note that you will not be able to copy onto a disc which has its write protect hole open.
Attempting to do so will result in the message:
Disc write-protected
Insert disc to WRITE
R-etry or C-anceL
.... whereupon you should type C to Cancel, remove the disc, and insert the correct disc
for copying onto, with its write protect hole closed.
Make sure that you don't close the write protect hole on a disc that contains programs
you want to keep, and NEVER close the write protect holes on your master CPIM
system discs package.
Copying on a 2-drive system
Follow the instructions above, loading the D I S C KIT 3 program from Side 1, then
select the Cop
y option from the main DISC KIT menu by pressing key 17.
At this point, you will receive a further menu:
Read from A:
8
. Read from B:
5
Exit menu
2
Copying on a 2-drive system means that you do not have to repeatedly insert and
remove the discs for copying to and from. The above menu allows you to select the
drive into which you wish to place the disc that you are copying from. Press key
f8
to
copy from the disc in Drive A.
Chapter 1 Page 80
Foundation Course