Cpc6128 - AMSTRAD cpc 6128 User Instruction

[ESC]b <cp>
CPC6128
Colour bits
[ESC]c <cp>
[ESC]d
[ESC]e
[ESC]f
[ESCb
[ESC]k
[ESC]l
[ESC]o
[ESC]p
[ESC]q
[ESC]r
[ESC]u
[ESC]v
Set foreground colour. Affects all characters on the screen. <cp>
is the colour parameter and is masked with &3F then treated as
three 2-bit numbers each specifying the intensity of one of the
three primary colours: bits 0,1 for Blue, bits 2,3 for Red, and bits.
4,5 for Green. The 6128 provides three levels of intensity,
mapped onto the four specifiable levels as:
Zero intensity
HalfIntensity Full intensity
00 binary 01 or 10 binary 11 binary
Set background colour. Affects all the background and border
on the screen. The colour is specified as above.
Erase to beginning of page. Includes character at cursor
position. The cursor position is unaffected.
Enable cursor blob. To prevent unsightly flashing, the cursor is
not turned on during normal text outputting until 1110 second
after the last character was written.
Disable cursor blob.
Save the cursor position.
Restore cursor position as saved by [ESC b.
Erase line. The cursor position is unaffected.
Erase to beginning ofline. Includes character at cursor position.
The cursor posi tion is unaffected.
Enter inverse video mode. Printable characters are written
with the foreground and background colours reversed.
Exit inverse video mode.
Enter underline mode. (Not supported on CPC6128)
Exit uJ;lder line mode. (Not supported on CPC6128)
Wrap at end ofline.
For your reference ....
Chapter 7 Page 51