Set The Mx3X Power Schemes Timers - LXE MX3X User Manual

14

Set the MX3X Power Schemes Timers

Note: Refer to the section titled "Power Modes" later in this guide for information relating to
the power states of the MX3X.
Select Start | Settings | Control Panel | Power | Schemes tab. Change the parameter values and
tap OK to save the changes.
Battery Power Scheme
Use this option when the MX3X will be running on battery power only.
Switch state to User Idle:
Switch state to System Idle:
Switch state to Suspend:
AC Power Scheme
Use this option when the MX3X will be running on external power (e.g. AC adapter, cigarette
adapter, powered cradle).
Switch state to User Idle:
Switch state to System Idle:
Switch state to Suspend:
These mode timers are cumulative. The System Idle timer begins the countdown after the User
Idle timer has expired and the Suspend timer begins the countdown after the System Idle timer has
expired. When the User Idle timer is set to "Never", the power scheme timers never place the
device in User Idle, System Idle or Suspend modes (even when the MX3X is idle).
Because of the cumulative effect, and using the Battery Power Scheme Defaults listed above:
• The backlight turns off after 3 seconds of no activity,
• The display turns off after 18 seconds of no activity (15sec + 3sec),
• And the MX3X enters Suspend after 5 minutes and 18 seconds of no activity.
MX3X User's Guide
Default is After 3 seconds
Default is After 15 seconds
Default is After 5 minutes
Default is After 2 minute
Default is After 2 minutes
Default is 5 minutes
E-EQ-MX3XOGWW-A
Quick Start