Battery Chargers; Lxe Multi-Charger Plus; External Power Supply (Optional); Figure 24 Mx3 Multi-Charger Plus - LXE MX3X User Manual

Hide thumbs Also See for MX3X:

Table of Contents

Battery Chargers

Note:

LXE recommends that the correct MX3 Multicharger Plus always be used to charge the

MX3X main battery pack. The Multicharger plus label is located on the back of the

device and the charger must have been upgraded to V1.01. Please contact your LXE

representative for further information about theV1.01 upgrade kit, if needed.

The Main Battery can be charged in the MX3 Multi-Charger Plus. The Main Battery charges the

Backup Battery using the MX3X's internal charging circuitry.

The MX3X DC power jack is located on the endcap.

The cradle power jack is located on the back of the cradle.The MX3X (and the Desktop Cradle)

connect to any of the following power supplies through the DC Power Jack.

Note:

When the MX3X is receiving power through a cradle connected to external power, the

cradle's Status LED and the MX3X's CHGR LED are illuminated.

E-EQ-MX3XOGWW-A

MX3X User's Guide

Table of Contents