System Idle Mode; Suspend Mode - LXE MX3X User Manual

Power Modes

System Idle Mode

Note: When the display is Off, the unit is still On. The unit functions normally – tethered
scanner trigger press or integrated scanner Scan key press will cause scans.
Communications through the radio or serial ports continue.
System Idle timers are set using Start | Settings | Control Panel | Power | Schemes tab.
The display is turned off when the System Idle timer expires before a wakeup event takes place.
The Power button is tapped which immediately wakes the unit up.
The Status LED blinks green when the Display enters Off mode.
Any of the following primary events will wake the display and display backlight:
Any key on the keypad
Stylus touch on the touch screen
Power button tap
When the display wakes up, the System Idle Timer begins the countdown again. When any of the
above events occur prior to the timer expiring, the timer begins the countdown again.
The first display wakeup key press or touch is sent to the operating system or running application.
Once the display is On, the keyboard and touch screen function normally.

Suspend Mode

The Suspend mode is entered when the MX3X is inactive for a predetermined period of time, the
user taps the Power button or the user selects Start | Suspend.
MX3X Suspend timers are set using Start | Settings | Control Panel | Power | Schemes tab.
Any of the following can be configured to wake the unit and reset the display and display
backlight timers:
Any key on the keypad
Power button tap
COM1 CTS
COM3 CTS
When the unit wakes up, the User Idle, System Idle and the Suspend timers begin the countdown
again. When any one of the above events occurs prior to the Suspend timer expiring, the Suspend
timer begin the countdown again.
The first wakeup key press or touch is not sent to the operating system or running application –
the first keypress or touch is only used to wake up the unit and reset the timers. Once the unit has
transitioned from the Suspend mode to the On mode, the unit, keyboard and touch screen function
normally.
E-EQ-MX3XOGWW-A
PC card activity
Stylus touch on the touch screen
External power connection
USB client connection
MX3X User's Guide
27