Power Button; Restart Sequence; Check Battery Status; Attach The Stylus Clip (Optional) - LXE MX3X User Manual

Hide thumbs Also See for MX3X:

Table of Contents

Power Button

Note:

Refer to the section titled "Power Modes" later in this guide for information relating to

the power states of the MX3X.

The power button is located above the ESC key on the keypad. When a battery is inserted in the

MX3X for the first time press the Power button.

Quickly tapping the Power button places the MX3X immediately in Suspend mode. Quickly

tapping the Power button again, or touching the screen, immediately returns the MX3X from

Suspend.

Please refer to the section titled "Power Modes" later in this guide for a list of the kinds of

activities (Primary Events) that will return the MX3X from Suspend Mode.

Tap the Start button then tap Restart. If the touchscreen is not accepting taps or needs

recalibration, press <Ctrl>+<Esc> to force the Start Menu to appear.

When the Windows CE. NET desktop is displayed or an application begins, the power up (or

reboot) sequence is complete. If you have previously saved your settings, they will be restored on

reboot.

Tap the Start | Settings | Control Panel | Power icon. Main and backup battery level, status and

Power Scheme timeout setting options are displayed.

Carefully remove the paper backing from the Stylus Clip sticky. Firmly press the sticky side of the

clip onto the MX3X and hold in place for 15 seconds. Thread the tether through the end of the

stylus and tie the ends firmly to the Stylus Clip so that the ends don't interfere with placing the

stylus in the Stylus Clip. Place the stylus in the Stylus Clip when not in use.

MX3X User's Guide

Quick Start

E-EQ-MX3XOGWW-A

Table of Contents