Configuring Pppoe Connection - Modecom MC-421 User Manual

WLAN Router

Configuring PPPoE connection

If your ISP's Internet service uses PPPoE you need to set up a PPP login account. The first time that you login to the
Internet, your ISP will ask you to enter a username and password so they can check that you are a legitimate, regi-
stered Internet service user. Your device stores these authentication details, so you will not have to enter this user-
name and password every time you login.
If your ISP wants you to connect to the Internet using PPP, follow the instructions below.
From the left-hand Network Settings -> WAN Interface menu. The following page is displayed:
From the WAN Access Type drop-down list, select PPPoE setting.
Enter User Name/Password provided by your ISP. Type them in the relevant boxes.
Click Apply Changes.
Click OK.
75