Table of Contents
Advertisement
WLAN Router
Configuring DHCP Client connection
Dynamic Host Configuration Protocol (DHCP), Dynamic IP (Get WAN IP Address automatically). If you are connected
to the Internet through a Cable modem line, then a dynamic IP will be assigned.
If your ISP wants you to connect to the Internet using DHCP Client, follow the instructions below.
From the left-hand Network Settings -> WAN Interface menu. The following page is displayed:
From the WAN Access Type drop-down list, select DHCP Client setting.
Click Apply Changes.
Click OK.
From the left-hand Management -> Status menu. The following page is displayed:
If you could see the Attain IP Protocol is shown DHCP, you can have the Internet Access right now.
73
Advertisement
Table of Contents
Need help?
Do you have a question about the MC-421 and is the answer not in the manual?
Questions and answers