Deny Listed; Wds Settings - Modecom MC-421 User Manual

WLAN Router

Deny Listed

When 'Deny Listed' is selected, these wireless clients on the list will not be able to connect the Access Point.
From the Wireless Access Control Mode drop-down list, select Deny Listed setting.
Enter the MAC Address.
Enter the Comment.
Click Apply Changes button.
Change setting successfully! Click on OK button to confirm and return.
The MAC Address that you created has been added in the Current Access Control List.

WDS settings

Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To do this,
you must set these APs in the same channel and set MAC address of other APs which you want to communicate with
in the table and then enable the WDS. To access the Wireless Network WDS settings page:
From the left-hand Wireless menu, click on WDS settings. The following page is displayed:
45