Security - Modecom MC-421 User Manual

WLAN Router
Field
Authentication Type
Fragment Threshold
RTS Threshold
Beacon Interval
Data Rate
Preamble Type
Broadcast SSID
IAPP
802.11g Protection
WMM
RF Output Power
Turbo Mode

Security

This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys could prevent any
unauthorized access to your wireless network. To access the Wireless Network Security page:
From the left-hand Wireless menu, click on Security. The following page is displayed:
www.modecom.eu
38
Description
Configure the Authentication Type to Open System, Shared Key or Auto
When transmitting a packet over a network medium, sometimes the packet is bro-
ken into several segments, if the size of packet exceeds that allowed by the ne-
twork medium.
The Fragmentation Threshold defines the number of bytes used for the fragmenta-
tion boundary for directed messages.
RTS stands for "Request to Send". This parameter controls what size data packet the
low level RF protocol issues to an RTS packet. The default is 2347.
Choosing beacon period for improved response time for wireless http clients.
Select the Data Rate from the drop-down list
Specify the Preamble type is short preamble or long preamble
Broadcast or Hide SSID to your Network.
Default: Enabled
Disable or Enable IAPP
A protection mechanism prevents collisions among 802.11g nodes.
Enable/disable the Wi-Fi Multimedia (WMM) support.
TX Power measurement.
Configure the Turbo Mode to Auto, Always or Off
Note: „Always" may have compatibility issue. „Auto" will only work with Realtek pro-
duct.