Viking Electromagnetic Lock - Viking G-5 Installation Instructions Manual

M M - - 2 2

VIKING ELECTROMAGNETIC LOCK

VIKING ELECTROMAGNETIC LOCK
™
Standard Features
• Mounting base with electrical box
• 24VDC Plug-in transformer
• 12VDC or 24VDC operation
• 500mA at 12VDC operation
• 250mA at 24VDC operation
• 1300 pounds of holding force
Mounting Plate
Floating Plate
Magnetic Lock
Mounting Plate/
Juction Box
7.5"
2.100"
3.000" to
3.125"
(example)
24VDC Transformer
(Supplied with Lock Kit)
24VDC
This Magnetic Lock is an OPTIONAL ACCESORY available from
Viking Access Systems. Please order part number VA-MAG13.
24
Floating Plate
Guide Pin (2)
Use long or short pin
depending on number
of spacers used
Flexible Washer
Spacer (0 to 3)
Use to adjust
gap between
Floating Plate and
Magnetic Lock
Mounting Plate
(Weld to Gate)
Set Screw
10.625"
(Locks Floating Plate
Mounting Screw)
24 Volt DC Transformer
(Supplied with Lock Kit)
External supply for the magnetic
lock must be provided. This will
prevent rapid drainage of the bat-
tery in the event of power failure.
Relay Contact 10A-250VAC
Magnetic
Lock
4-wire Cable
(Supplied with
Lock Kit)
Green
Black
White
Red
TECHNICAL SUPPORT 1 800 908 0884
Mounting Plate/Juction Box
(Weld to Post)
Magnetic Lock
Mounting Screw (4)
Mounting Screw
Weather Cover (4)
Floating Plate
Mounting Screw
Cover
Plate
Cover Plate
Mounting
Screw (4)
Connection Location
Radio Station
N.O.
COM
N.C.
Mag.
Lock
Motor Sensor
Low Battery
Loop Conne