Plan Of Installation - Open Outside - Viking G-5 Installation Instructions Manual

PLAN OF INSTALLATION – OPEN OUTSIDE PLAN OF INSTALLATION – OPEN OUTSIDE
The gate must be installed in a location so that enough clearance is supplied
between the gate and adjacent structures when opening and closing to reduce the
risk of entrapment.
Swinging gates shall not open into public access areas.
Outside
90°/ 105°
Gate in Closed Position
E: 4-3/4"
Inside
Open Outside Plan of Installation
TECHNICAL SUPPORT 1 800 908 0884
B:
6-5/8"
C:
28"
Figure B
Note: Varying from the dimensions shown
may severely affect the speed and
performance of the gate operator.
Not a Not a
Public Public
Access Area Access Area
Gate in Open Position
Custom Plate
Required
(Not Supplied)
A: 7-7/8"
11