Device ID
The Device ID option allows you to choose from two printer emulations:
5225 or 3287 4234. The emulation you choose becomes the selected
emulation the next time the printer is turned on.
NOTE: For the Device ID to be effective, the parameters must be saved in
Panel Language
This feature is used to save the current language option in NVRAM. The
language you choose will be in effect the next time the printer is turned on.
Follow the steps outlined at the beginning of this section to make a language
selection.
•
ENGLISH (factory default)
•
AUSTRIAN/GERMAN
•
FRENCH
•
SPANISH
NOTE: For the Panel Language to be effective, the parameters must be
PTX. Transparent Extensions
You can enable various Printronix features not available on IBM models
4234 and 5225 printers. To access these features, you must send commands
in the data stream. The commands must have a start and end code. Three
defaults (each containing a start and end code) are available.
1. Press the
options.
2. Press the
display shows:
Configuring the Printer
NVRAM and power must be turned off and then back on.
saved in NVRAM and power must be cycled.
switch to move through the FORMAT PARAMETER
switch when PTX. TRANSPARENT displays. The message
PTX. TRANSPARENT
SET x
xx x
3–27